STIHL construction machinery

Up to 24 Installments! | GS 461 New STIHL diamond chain cutter 36 GBM Strong 5.8 Hp STIHL building material cutter. Comfortably cuts concrete, concrete, stone, bricks, masonry and sewer pipes. With STIHL 2-MIX engine and HD 2 air filter with long life. Deep cuts exceeding 150 mm and cutting depth 40cm. With the possibility of providing water for cooling, dust suppression and rinsing of the chain. Ideal for renovation and conversion work.

Up to 24 Installments! | TS 420 Very light and easy to use STIHL grout Compact STIHL compact grinder with an innovative long-lasting air filter system with separation cyclone for extremely long filter life and extended service intervals. Meets EU emission rules II Relaxed work thanks to the low vibration values. Driven by hand or mounted on the FW 20 carriage.

Innovative STIHL 5.3 Hp grinder for 350 cutting discs with STIHL Injection. With high torque and easy start. Equipped with a long-lasting air filtration system and electronic water supply system. Driven by hand or mounted on the FW 20 carriage.

Up to 24 Installments! | TS 700 Powerful top cutter STIHL The new top model with a very powerful 5.0 kW motor. New long-lasting air filter system with separation cyclone. Ergonomic design with optimized grip positions. ElastoStart system, pressure compensator and decompression valve. Delivered with water connector and resin tray. Driven by hand or mounted on the FW 20 trolley.

Up to 24 Installments! | TS 800 Extremely strong STIHL grinder 5.0 kW (400 mm) Very powerful high performance STIHL grinder with long lasting air filter system with separation cyclone. Complies with EPA II and EU II emissions regulations. It is used everywhere, where the type and thickness of the material require high engine power. Ergonomic design with optimized grip positions. ElastoStart system, pressure compensator and decompression valve. Delivered equipped with a water connector and a synthetic resin disc (diameter 400 mm). Driven by hand or mounted on the FW 20 trolley.

Up to 24 Installments! | BT 131 STIHL Single Operator Drill Single Operator STIHL Drill with QuickStop Array Brake. Delivered without arida.

Up to 24 Installments! | BT 360 Strong two-operator STIHL boreholeSturdy two-operator STIHL borehole. The folding frame is lined with a durable plastic cover for a firm grip.

Up to 24 Installments! | BT 45 STIHL hand drill STIHL hand drill with powerful gasoline engine and planting coil. Ideal for drilling planting holes in the ground. With handle, special adapter, two speeds and the ability to reverse the direction to solve clogged aris. Idle position for safe starting of the machine with the tool stopped. Possibility of supply with wood drills.

Up to 24 Installments! | BT 45 STIHL wood drill STIHL hand drill with powerful gasoline engine and STIHL wood drill. Ideal for drilling holes up to 25mm in diameter, in places where there is no electrical network or when the battery drills do not work satisfactorily due to low temperature. With handle, quick tightening chuck, two speeds and the ability to reverse the direction to solve clogged drills. Idle position for safe starting of the machine with the tool stopped.

Economic chain for fast, calm and vibration-free wet cutting. Extremely suitable for abrasive building materials such as tiles and sandstone, hardened diamond sections.

Guidance and support aid for cutting concrete and masonry. Made of hardened, galvanized steel, for GS 461.

Recommended for work on ductile castings. Durable and fast to cut, base disc with metallic silver color.

Recommended for work on ductile castings. Durable and fast to cut, base disc with metallic silver color.

For cutting building steel and metal profiles in buildings and metalworking companies.

Cutting disc for cutting concrete, tiles, exposed aggregate concrete as well as reinforced concrete and general building materials.

Cutting disc for general use in construction.

Cutting disc for general use in construction.

Cutting disc for general use in construction.

Special cutting disc for road construction and pipeline construction.

Special cutting disc for road construction and pipeline construction.

Special cutting disc for road construction and pipeline construction.

Extremely durable cutting wheels for use in construction or metalworking businesses. Suitable for cutting steel, structural steel, reinforcing bars and steel beams.

Extremely durable cutting wheels for use in construction or metalworking businesses. Suitable for cutting steel, structural steel, reinforcing bars and steel beams.

Extremely durable cutting wheels for use in construction or metalworking businesses. Suitable for cutting steel, structural steel, reinforcing bars and steel beams.

For wet cutting of stone and concrete without creating dust.

General purpose professional disc. Suitable for cutting bricks, concrete, cobblestones, granite and cast pipes. Sections with resistance to high temperatures, therefore recommended for cutting construction steel with a thickness of up to 10 mm. It is also recommended for demolition work by disaster response teams.

General purpose professional disc. Suitable for cutting bricks, concrete, cobblestones, granite and cast pipes. Sections with resistance to high temperatures, therefore recommended for cutting construction steel with a thickness of up to 10 mm. It is also recommended for demolition work by disaster response teams.

General purpose professional disc. Suitable for cutting bricks, concrete, cobblestones, granite and cast pipes. Sections with resistance to high temperatures, therefore recommended for cutting construction steel with a thickness of up to 10 mm. It is also recommended for demolition work by disaster response teams.

General purpose disc. Thanks to the special construction of the cutting sections, this disc is suitable for soft materials such as asphalt, but also for reinforced concrete or concrete blocks.

General purpose disc. Thanks to the special construction of the cutting sections, this disc is suitable for soft materials such as asphalt, but also for reinforced concrete or concrete blocks.

General purpose disc. Thanks to the special construction of the cutting sections, this disc is suitable for soft materials such as asphalt, but also for reinforced concrete or concrete blocks.

For cutting concrete, bricks and concrete with exposed aggregates. Also suitable for reinforced concrete and building materials in general. Available in various power categories, gray color.

Για την κοπή σκυροδέματος, τούβλων και σκυρόδεμα με εκτεθειμένα αδρανή. Επίσης κατάλληλος για οπλισμένο σκυρόδεμα και οικοδομικά υλικά εν γένει. Διατίθενται σε διάφορες κατηγορίες ισχύος, γκρι χρώμα.

For cutting concrete, bricks and concrete with exposed aggregates. Also suitable for reinforced concrete and building materials in general. Available in various power categories, gray color.

For cutting concrete, bricks and concrete with exposed aggregates. Also suitable for reinforced concrete and building materials in general. Available in various power categories, gray color.

For cutting concrete, bricks and concrete with exposed aggregates. Also suitable for reinforced concrete and building materials in general. Available in various power categories, gray color.

For cutting concrete, bricks and concrete with exposed aggregates. Also suitable for reinforced concrete and building materials in general. Available in various power categories, gray color.

For cutting concrete, bricks and concrete with exposed aggregates. Also suitable for reinforced concrete and building materials in general. Available in various power categories, gray color.

For cutting concrete, bricks and concrete with exposed aggregates. Also suitable for reinforced concrete and building materials in general. Available in various power categories, gray color.

For cutting concrete, bricks and concrete with exposed aggregates. Also suitable for reinforced concrete and building materials in general. Available in various power categories, gray color.

Up to 24 Installments! | Diamond disk, Concrete (B) STIHL D-B60 Ø 400mm / 16 "For cutting concrete, bricks and concrete with exposed aggregate. Also suitable for reinforced concrete and building materials in general. Available in various strength categories, gray color.

For cutting concrete, bricks and concrete with exposed aggregates. Also suitable for reinforced concrete and building materials in general. Available in various power categories, gray color.

For cutting concrete, bricks and concrete with exposed aggregates. Also suitable for reinforced concrete and building materials in general. Available in various power categories, gray color.

For cutting concrete, bricks and concrete with exposed aggregates. Also suitable for reinforced concrete and building materials in general. Available in various power categories, gray color.

For cutting concrete, bricks and concrete with exposed aggregates. Also suitable for reinforced concrete and building materials in general. Available in various power categories, gray color.

For cutting concrete, bricks and concrete with exposed aggregates. Also suitable for reinforced concrete and building materials in general. Available in various power categories, gray color.

For cutting concrete, bricks and concrete with exposed aggregates. Also suitable for reinforced concrete and building materials in general. Available in various power categories, gray color.

For cutting works on asphalt, fresh concrete, concrete with abrasive properties and sandstone. Sector height 10 mm with increased cutting efficiency in all power categories, protective sections, base disc in black.

For cutting works on asphalt, fresh concrete, concrete with abrasive properties and sandstone. Sector height 10 mm with increased cutting efficiency in all power categories, protective sections, base disc in black.

For cutting works on asphalt, fresh concrete, concrete with abrasive properties and sandstone. Sector height 10 mm with increased cutting efficiency in all power categories, protective sections, base disc in black.

For cutting works on asphalt, fresh concrete, concrete with abrasive properties and sandstone. Sector height 10 mm with increased cutting efficiency in all power categories, protective sections, base disc in black.

Up to 24 Installments! | Diamond disk, Asphalt (A) Trennscheibe STIHL D-A80 Ø 400mm / 16 "For cutting works on asphalt, fresh concrete, concrete with abrasive properties and sandstone. Section height 10 mm with increased cutting efficiency in all power categories, protective base in black.

For cutting works on asphalt, fresh concrete, concrete with abrasive properties and sandstone. Sector height 10 mm with increased cutting efficiency in all power categories, protective sections, base disc in black.

For cutting works on asphalt, fresh concrete, concrete with abrasive properties and sandstone. Sector height 10 mm with increased cutting efficiency in all power categories, protective sections, base disc in black.

For cutting works on asphalt, fresh concrete, concrete with abrasive properties and sandstone. Sector height 10 mm with increased cutting efficiency in all power categories, protective sections, base disc in black.

Up to 24 Installments! | Guide stretcher FW 20Turns the grinder to a wheeled cutting machine For STIHL TS 400The STIHL FW 20 guide stretcher turns any STIHL hand grinder into a wheeled cutting machine with excellent steering properties. Allows you to make long cuts with depth adjustable to millimeter accuracy.

Up to 24 Installments! | Guide stretcher FW 20Turns the grinder to a wheeled cutting machine For STIHL TS 410, TS 420, TS 480i, TS 500iThe steering stretcher STIHL FW 20 turns any STIHL hand grinder into a wheeled cutting machine with a cutting machine tool. Allows you to make long cuts with depth adjustable to millimeter accuracy.

Up to 24 Installments! | Guide stretcher FW 20Turns the grinder to a wheeled cutting machine For STIHL TS 700 / TS 800The STIHL FW 20 guide stretcher turns any STIHL hand grinder into a wheeled cutting machine with excellent steering properties. Allows you to make long cuts with depth adjustable to millimeter accuracy.

13 L. For the FW carriage 20. With link.

10 L. For the supply of water to the joint cutters on construction sites without connection to the water supply network. Not recommended for GS 461.