TS 420 Πολύ ελαφρύς και εύχρηστος αρμοκόφτης STIHL
chevron_left chevron_right

TS 420 Very light and easy to use STIHL grinder

Up to 24 Installments! | TS 420 Very light and easy to use STIHL grout Compact STIHL compact grinder with an innovative long-lasting air filter system with separation cyclone for extremely long filter life and extended service intervals. Meets EU emission rules II Relaxed work thanks to the low vibration values. Driven by hand or mounted on the FW 20 carriage.

€1,364.00 (tax incl.) €1,100.00 (tax excl.)
Tax included

Buy Now-Pay Later!

For buys above 150€ you can have 12 interest free installments!

Untill 24 installments for buys over 500€! with interest 6%


Due to emergency circumstances that have been presented a COVID-19 pandemic, delays and changes to the availability of the products may occur.

For more information, contact us at 24310-26623 & at


Up to 24 Installments! | TS 420 Very light and easy to use grinder STIHL TS 420 Very light and easy to use grinder STIHL 3,2kW with cutting disc 350mm 1) Ready with water connection 2) Coefficient K according to directive 2006/42 / EC = 2.5 dB (A) 3) Coefficient K according to the directive 2006/42 / EC = 2m / s ² 4) Complete, without tools Cubic capacity cm3 66.7 Power kW / Hp 3.2 / 4.4 Weight kg 1) 9.7 Cutting depth mm 125 Fuel tank capacity l 0.71 Sound power level dB (A) 2) 109 Sound pressure level dB (A) 2) 98 Vibration, left / right m / s² 3) 3.9 / 3.9 Weight 4) 9.75 Standard Anti-vibration system Long-term , strong vibrations in the handles of the machines can cause problems in the perspiration of the fingers and hands. To prevent this problem, STIHL has developed a high quality anti-vibration system. On machines with anti-vibration transmission is reduced substantially in the grips of the oscillations produced by the internal combustion engine and the driven equipment decompression valve The decompression valve allows a portion of the compressed mixture to escape from the cylinder at the engine start. This significantly reduces the force required to pull the starter rope. This relaxes the operator and protects the entire starting system of the machine from mechanical stress. Ergonomic round grip The new modern design offers improved grip positions. The circular handle allows great comfort when cutting, in all work positions. Semi-automatic belt tensioner By loosening the tension screws, the trapezoidal belt is automatically adjusted to obtain the correct tension. This ensures very good power transmission with very little friction. Scanning system Thanks to the scanning system, the new two-stroke engine produces less exhaust gas and has an impressive power output. Long-lasting air filtration system The long-lasting air filter system with separation cyclone ensures that 80% of the dust particles present in the suction air are retained, already in the first stage of the filter system. Unlike conventional systems, the particles do not end up in the foam filter, but are separated from the suction air and released into the atmosphere. This eliminates the cleaning intervals of the foam filter. Manual fuel pump With the manual fuel pump, fuel is fed to the carburetor at the touch of a thumb. This reduces the number of starter pulls after a long period of machine immobilization. Water connector Through the water connector with spray system, the cutting disc is wetted with water that binds only the dust and is created during the cutting. It is mounted on the machine in such a way as not to disturb when working Bumper magnesium Bumper prionodiksou from cast magnesium. Significantly reduces the overall weight of the machine. Optional ElastoStart System When pulling the starter rope on two-stroke engines, the compression pressure creates sharp power fluctuations that strain the muscles and joints. The ElastoStart system significantly reduces these effects. A special shock absorber inside the starter handle is stretched according to the pulling force, eliminating the sharp force peaks and thus smoothing the starting process. Driver stretcher With the combination of grinder and STIHL guide stretcher, road repairs are done quickly, cleanly and accurately. As the machines can be transported mounted on the stretcher, high efficiency is ensured when changing locations.

Data sheet
Shipping & Returns

** Shipping of each product are added to the basket along with the product price by pressing "ADD TO CART".

The mission of the products is done in two ways (depending on the weight & volume of the product)

Courier 2-4 days
Transportation (3-5 days for mainland Greece & 5-7 days for island Greece)

In the event of a high weight or volume, the mission will be carried out by a carrier, without the possibility of cash.
Our company undertakes the mission of products throughout Greece to selected agencies (usually prefectural primates).

Our company reserves the right to execute the order or modification of transport costs, in case of special conditions, such as inaccessible areas, a total large volume, or a total weight of order, etc.

In the above case, telephone communication will be preceded for your immediate update.

* In the event of a customer's order withdrawal, the return costs will be charged to the customer and may be different from the initial shipping cost. Transfers withdrawal from the customer's order is calculated by volume or kilograms.


You can repay your purchase from with installments!

We Offer 12 free of interest installments for buys above 150€, and we offer 24 installments with interest 6% for buys 500€!

When paying your purchase, it is detailed in the 'Shopping Cart' your selection to buy at installments, as well as any charge if you have chosen installments.

* The cost of your purchase, as well as the amount of each installment, appear on your screen before you finish the transaction.

You might also like