Up to 24 Installments! | MS 462 CM The lightest high performance STIHL chainsaw MS 462 CM The lightest high performance STIHL chainsaw 1) No fuel, blade and chain 2) Coefficient K according to Directive 2006/42 / EC = 2.5 dB (A) K) Coefficient according to Directive 2006/42 / EC = 2m / s β Cubic capacity cm³ 72,2 Power kW / HP 4,4 / 6 Weight kg 1) 6 Power to weight ratio kg / kW 1,4 Sound pressure level dB (A) 2) 108 Sound power level dB (A) 2) 119 Left / right vibrations m / s² 3) 4,8 / 3,6 Step / chain type 3/8 " Standard Decompression valve The decompression valve allows some of the compressed mixture to escape the cylinder when starting the engine. in this way decreases significantly the force needed for pulling the starting rope. this relieves the operator and protects all the starting system of the machine by mechanical stress. filtarismatos long air system the filtarismatos system long-lasting air with a separation cyclone ensures a significantly longer life filter life. Its separation cyclone removes large particles of pollutants, so as not to burden the filter, thus doubling the time until the next cleaning. STIHL M-Tronic Fully electronic engine control system regulates ignition timing and fuel supply in each operating mode, taking into account external factors such as temperature, altitude and fuel quality. Ensures excellent engine performance and very good acceleration. No need to adjust the carburetor manually. In addition, the M-Tronic records the settings from the last use so that at each restart you immediately have the full power of the engine. STIHL 2-MIX engine STIHL 2-MIX engine The two-stroke STIHL engine with 2-MIX technology ensures high power, excess power and fuel savings of up to 20% compared to two-stroke STIHL engines of equivalent power without 2-MIX technology. STIHL 2-MIX with scan During scanning, a layer of fresh air is inserted between the exhaust and the new fuel mixture entering the cylinder. This layer of air reduces fuel losses during the renewal of the mixture and, consequently, reduces the burden on humans and the environment. Anti-vibration system In the long run, strong vibrations in the handles of machines can cause problems with the perspiration of the fingers and hands. To prevent this problem, STIHL has developed a high quality anti-vibration system. In machines with anti-vibration system, the transmission to the handles of the oscillations produced by the motor and the component is significantly reduced. Pressure compensator The STIHL pressure compensator, a regulator built into the carburetor, ensures that engine performance, exhaust quality and fuel consumption remain almost constant over an extended period of time, despite progressive air pollution. Lateral chain tensioner With the side tensioner, the chain is stretched from the side, through the bell cap. This avoids the contact of the hands with the sharp chain and the support nails of the chainsaw. ElastoStart system When pulling the starter rope on internal combustion engines, the compression pressure creates sudden power fluctuations that put strain on the muscles and joints. A shock absorber integrated in the special ElastoStart start handle absorbs and releases force, depending on the compression course. This normalizes the boot process and eliminates jerks. Tank cap that opens without tools Special secured plugs for the fuel tank and the oil tank. In machines with such plugs, the tank and the oil tank open and close quickly, with minimal force and without tools. Bell cap with safety nuts The nuts are permanently attached to the bell cap. This way the nuts are not lost, they are always properly positioned and do not warp when the lid is installed.