BG 86 STIHL Blower 1) In operation as a blower 2) Without hose and nozzles 3) Coefficient K according to Directive 2006/42 / EC = 2.5 dB (A) 4) Coefficient K according to Directive 2006/42 / EC = 2m / s ² 5) With round nozzle in operation as a blower Cubic capacity cm3 27.2 Power kW / Hp 0.8 / 1.1 Weight kg 1) 4.4 Maximum air supply m3 / h 2) 810 Sound pressure level dB (A) 3) 104 Sound pressure level dB (A) 3) 90 Vibration, right m / s2 4) 2.5 Tank volume l 0.44 Air supply m3 / h 5) 755 Standard STIHL 2-MIX engine The STIHL two- stroke engine with 2-MIX technology ensures high power, excess power and fuel savings of up to 20% compared to STIHL two-stroke engines of equivalent power without 2-MIX technology. HD2 filter The pores of the HD2 filter made of polyethylene are up to 70% thinner than in a membrane or polyamide filter. This removes the fine dust, while it is easy to clean. Ergonomic handle with soft grip belt The machine is easy and safe to operate, because you do not need to move your hand away from the handle. The throttle can be stabilized in any position between idle and full throttle. This greatly facilitates the work, especially in case of long hours of use. Locking throttle lock The trigger can be locked in place for full throttle. The engine shuts off at the touch of a button. Then the machine is ready to start again. STIHL anti-vibration system The STIHL anti-vibration system reduces the transmission of oscillations generated by the motor. This relieves the back muscles. Goggles Necessary to protect your eyes from accidents. Manual fuel pump With the manual fuel pump, fuel is fed to the carburetor at the touch of a thumb. This reduces the number of starter pulls after a long period of machine immobilization. All green trimmers and blowers have a manual fuel pump. ElastoStart system When pulling the starter rope on two-stroke engines, the compression pressure creates sudden power fluctuations that put strain on the muscles and joints. The ElastoStart system significantly reduces these effects. A special shock absorber inside the starter handle is stretched according to the pulling force, eliminating the sharp force peaks and thus smoothing the starting process.
