FS 240 CE Brushcutter STIHL 2.3 HP 1) Without battery, cutter and bumper 2) Without cutter 3) Coefficient K according to Directive 2006/42 / EC = 2m / s ² / Coefficient K according to Directive 2006/42 / EC = 2m / s ² 4) Coefficient K according to Directive 2006/42 / EC = 2.5 dB (A) Cubic capacity cm3 37.7 Power kW / Hp 1.7 / 2.3 Weight kg 1) 7.1 Cutting diameter mm 420 Total length cm 2) 180 Tank volume l 0.75 Cutting part AutoCut cutting head 30-2 Vibrations, left / right with metal part m / s2 3) 4.6 / 4 Vibrations, left / right m / s2 3) 5.2 / 4.9 Sound power level dB (A) 4) 108 Sound pressure level dB (A) 4) 98 Standard STIHL 2-MIX engine The 2- stroke STIHL engine with 2-MIX technology ensures high power, excess power and fuel savings of up to 20 % compared to STIHL two-stroke engines without 2-MIX technology. Large fuel tank The 0.75 l clear fuel tank ensures long working intervals with fewer refuelings. The fuel level is visible the tank is accessible and opens very easily. Long life filter The filter is easily accessible and ensures long change intervals. Summer-winter mode Easy switching between summer and winter mode for good engine operation under all conditions. Anti-vibration system The anti-vibration system is used in green care machines. Rubber rings reduce the transmission of annoying vibrations caused by the motor and the rotating cutting part. Thus the vibrations of the handles are reduced to a minimum. This makes your work more comfortable and more relaxed. (Similar image) Pressure regulator The STIHL pressure compensator, a regulator fitted to the carburetor, prevents excessive enrichment of the mixture during the progressive contamination of the air filter. Thanks to the pressure compensator, the performance of the motor remains stable for a longer period of time. The air filter needs cleaning only when 80% of its surface is clogged. This can lead to long maintenance-free working intervals. Automatic choke It is not necessary to check the switch at restart. The engine is always ready to start. Safety goggles The safety goggles included in the standard equipment are for your safety. The glasses are well ventilated and have wide side shields. (Similar image) Bicycle handle The bicycle handle is distinguished for its ergonomic design. It allows the user to operate the machine almost like a traditional hair dryer, and is adjustable with a button. In lawn mowers and mowers that are to be used frequently for mowing large areas, a bicycle handle is the best choice. Multi-function handle The multi-function handle is used on lawn mowers, mowers and edging shears. All controls for engine control are integrated in the handle. This makes handling simpler and safer, as you do not have to take your hand off the handle. The multi-function handle is integrated into the bicycle handle. On machines with a circular handle, the controls are located in the tube. (Proportional image) Adjustable handle without tools Adjustable handle without tools: The ergonomic bicycle handle is adjusted according to the personal needs of each operator, with one button and without tools. ErgoStart System Easier to start than ever. In the new ErgoStart system, there is an additional coil spring between the starter pulley and the crankshaft, which compresses against the compression pressure exerted on the piston. When the spring force exceeds the compression pressure, the crankshaft will start to rotate, starting the engine. The machine starts smoothly and comfortably, without annoying fluctuations in the required power. Manual fuel pump With the manual fuel pump you can encourage the pressure of the fuel in the carburetor. Thus, after a long pause in the operation of the machine, the number of starting paths is reduced.